Cracks in your driveway can be repaired by grinding down the top layer of concrete and adding a new top layer. While this process is time-consuming, it is ideal for minor cracks and stains. Replacing the entire driveway requires specialized equipment and multiple labor hours. Here are some steps to repair a cracked driveway. You can also patch a sunken area if the concrete has split or is crumbling.

You can replace the concrete if cracks are too large to patch. Concrete overlays are thin layers of cement-based material applied over the top of the existing concrete. Decorative finishes can be added to this material, making your driveway look as good as new. The best part about resurfacing is that it allows you to add a decorative finish to your concrete surface. You can even engrave the character to cover minor flaws.

Before applying the new layer, you should power wash the driveway’s surface. Any oil stains on the driveway can inhibit the new resurfacing material from adhering to the old one. You can purchase trisodium phosphate from a home center under various brand names. In addition, you must clean the cracks thoroughly and remove any debris. If you have many oil stains, you can use a firm wire brush to remove them.

Before repairing an old concrete driveway, check its foundation. If the driveway shifts and sinks, it might be due to the damage to its foundation. Fixing such an issue will require specialized equipment and experience. You can even use concrete sealant to repair a cracked driveway. When it comes to concrete, you need to be aware of the different types of cement used to make driveways.

Another way to prevent cracks is by painting the driveway. You can paint the concrete driveway to increase curb appeal and life span. If you have a driveway apron, you can hire a professional to paint it. Make sure to use acrylic paint with a sealer to protect it from damage caused by weeds. Additionally, you might need a permit to paint the entire driveway.

Once you’ve repaired the apron, you can proceed to the actual concrete. The cost of patching is dependent on the type of concrete you choose. If the cracks are narrow and only visible, you can patch them up. Compact the new concrete, so it blends well with the rest of the driveway.

To apply concrete resurfacer, clean the old concrete thoroughly with a high-pressure washer. Then use the resurfacing product, allowing the new surface to cure overnight. After 24 hours, the concrete will be ready for foot traffic. It would help if you kept the area in the shade before applying the resurfacing product. If you don’t have access to a power tool, you can always use a squeegee to spread it evenly on the concrete.

Check concrete driveway company in Worcester MA for more information